Back

PP1/2PTFE-EX

Pneumatic membrane pumps, PP body

Applications: Lubricants, waste oil, diesel, coolant, transmission fluid, windshield cleaner, solvents, etc.

Need advice?

Contact us

Pneumatic membrane pumps, PP body

Descriptive

Atex Pump marking: Ex II2 GD IIB/IIC 95°C.

Pumps designed for the transfer of aggressive and/or viscous liquids. Plastic pumps are recommended for strong acids and for bases. Dry self-priming pumps. The priming height varies depending on whether the pump is dry or wet. Flow rate adjustable by adjusting the pressure and the air flow (see accessories). In case of dry running, the pump continues to run without overheating or wear. If the pumping of liquid is stopped, the pump stops automatically without getting damaged.

Characteristics

More Information
Fluid Used oil, Windshield washer, Cooling liquid, Transmission fluid, Lubricants, Solvents
Technology Membrane
ATEX Yes
Pump marking Ex II2 GD IIB/IIC 95°C
Pump Bare
Max flow rate 50l/min
Orifice 1/2’’
Materials Conductive PP
Balls PTFE
Sockets Stainless steel
Other contact parts Stainless steel
Max. viscosity 5000 cPo
Pressure 8 bars
Dry membrane 6 m
Wet membrane 8 m
Air consumption from 3 to 22 Nm3/h
Membrane PTFE
Particles 3 mm