Back

INOX1/2PTFE-EX

Pneumatic membrane pumps, stainless steel body

Applications: Compatible with a vast range of chemicals, inks and varnishes

Need advice?

Contact us

Pneumatic membrane pumps, stainless steel body

Descriptive

Atex Pump marking: Ex II2 GD IIB/IIC 95°C.

Construction materials

  • Body: Stainless steel
  • Membranes: PTFE

Specifications and advantages:

  • Suitable for the transfer of aggressive and/or viscous liquids.
  • Metal pumps are significantly resistant to solvents, hydrocarbons, etc.
  • Dry self-priming. The priming height varies depending on whether the pump is dry or wet.
  • Flow rate adjustable by adjusting the pressure and the air flow (see accessories).
  • In case of dry running, the pump continues to run without overheating or wear.
  • If the pumping of liquid is stopped, the pump stops automatically without getting damaged.

Characteristics

More Information
Fluid Ink, Chemical products, Varnish
Technology Membrane
ATEX Yes
Pump marking Ex II2 GD IIB/IIC 95°C
Pump Bare
Max flow rate 50l/min
Orifice 1/2’’
Materials Stainless steel
Balls PTFE
Sockets Stainless steel
Max. viscosity 5000 cPo
Pressure 8 bars
Dry membrane 6 m
Wet membrane 8 m
Air consumption from 3 to 22 Nm3/h
Membrane PTFE
Particles 3 mm