Back

AL1/2PTFE-EX

Pneumatic membrane pump, Aluminium body

Applications: ATEX pump for solvents (acetone, acetates, aldehydes), inks, lacquers, paints, oils, diesel, petrol

Need advice?

Contact us

Pneumatic membrane pump, Aluminium body

Descriptive

Atex Pump marking: Ex II2 GD IIB/IIC 95°C.

Construction materials

  • Body: Aluminium
  • Membranes: PTFE

Specifications and advantages:

  • Compliant with the ATEX directive 94/9/EC ATEX.
  • Suitable for the transfer of aggressive and/or viscous liquids.
  • Metal pumps are significantly resistant to solvents, hydrocarbons, etc.
  • Dry self-priming. The priming height varies depending on whether the pump is dry or wet.
  • Adjustable flow rate by adjusting the pressure and flow rate of the air (see the accessories).
  • In case of dry running, the pump continues to run without overheating or wear.
  • If the delivery of liquid is stopped, the pump stops automatically without getting damaged.

Characteristics

More Information
Fluid Ink, Petrol, Diesel, Oil, Lacquer, Painting, Solvents
Technology Membrane
ATEX Yes
Pump marking Ex II2 GD IIB/IIC 95°C
Pump Bare
Max flow rate 50l/min
Orifice 1/2’’
Materials Aluminium
Balls PTFE
Sockets Stainless steel
Max. viscosity 5000 cPo
Pressure 7 bars
Dry membrane 8 m
Air consumption from 3 to 22 Nm3/h
Membrane PTFE
Particles 3 mm