Back

AL112PTFE-EX

Pneumatic membrane pump, Aluminium body

Applications: Recommended for solvents (acetone, acetates)

Need advice?

Contact us

Pneumatic membrane pump, Aluminium body

Descriptive

Atex Pump marking: Ex II2 GD IIB/IIC 95°C.

Pumps designed for the transfer of aggressive and/or viscous liquids.
Metal pumps are significantly resistant to solvents, hydrocarbons, etc.
Dry self-priming pumps.
The priming height varies depending on whether the pump is dry or wet.
Adjustable flow rate by adjusting the pressure and flow rate of the air (see the accessories).
In case of dry running, the pump continues to run without overheating or wear.
If the delivery of liquid is stopped, the pump stops automatically without getting damaged.

Characteristics

More Information
Fluid Solvents
Technology Membrane
ATEX Yes
Pump marking Ex II2 GD IIB/IIC 95°C
Pump Bare
Max flow rate 250l/min
Orifice 1’’1/2
Materials Aluminium
Balls PTFE
Sockets Stainless steel
Max. viscosity 10000 cPo
Pressure 8 bars
Dry membrane 5 m
Wet membrane 8 m
Air consumption from 6 to 87 Nm3/h
Membrane PTFE
Particles 6 mm