Pneumatic membrane pump, PVDF body

Applications: Compatible with a vast range of chemicals. Recommended for use with acids and bases

Need advice?

Contact us

Pneumatic membrane pump, PVDF body


Atex Pump marking: Ex II2 GD IIB/IIC 95°C.

Pumps designed for the transfer of aggressive and/or viscous liquids.
Plastic pumps are recommended for strong acids and for bases.
Dry self-priming pumps.
The priming height varies depending on whether the pump is dry or wet.
Adjustable flow rate by adjusting the pressure and flow rate of the air (see the accessories).
In case of dry running, the pump continues to run without overheating or wear.
If the delivery of liquid is stopped, the pump stops automatically without getting damaged.


More Information
Fluid Acid, Base, Chemical products
Technology Membrane
Pump marking Ex II2 GD IIB/IIC 95°C
Pump Bare
Max flow rate 100l/min
Orifice 1’’
Materials Conductive PDVF
Balls PTFE
Sockets PVDF
Other contact parts Hastelloy® C
Max. viscosity 5000 cPo
Pressure 8 bars
Dry membrane 4,5 m
Wet membrane 7 m
Air consumption from 3 to 30 Nm3/h
Membrane PTFE
Particles 4 mm