AL1/2PTFE-EX
Pneumatic membrane pump, Aluminium body
Applications: ATEX pump for solvents (acetone, acetates, aldehydes), inks, lacquers, paints, oils, diesel, petrol
Pneumatic membrane pump, Aluminium body
Descriptive
Pump marking: Ex II2 GD IIB/IIC 95°C.
Construction materials
- Body: Aluminium
- Membranes: PTFE
Specifications and advantages:
- Compliant with the ATEX directive 94/9/EC ATEX.
- Suitable for the transfer of aggressive and/or viscous liquids.
- Metal pumps are significantly resistant to solvents, hydrocarbons, etc.
- Dry self-priming. The priming height varies depending on whether the pump is dry or wet.
- Adjustable flow rate by adjusting the pressure and flow rate of the air (see the accessories).
- In case of dry running, the pump continues to run without overheating or wear.
- If the delivery of liquid is stopped, the pump stops automatically without getting damaged.
Characteristics
| Fluid | Ink, Petrol, Diesel, Oil, Lacquer, Painting, Solvents |
|---|---|
| Technology | Membrane |
| ATEX | Yes |
| Pump marking | Ex II2 GD IIB/IIC 95°C |
| Pump | Bare |
| Max flow rate | 50l/min |
| Orifice | 1/2’’ |
| Materials | Aluminium |
| Balls | PTFE |
| Sockets | Stainless steel |
| Max. viscosity | 5000 cPo |
| Pressure | 7 bars |
| Dry membrane | 8 m |
| Air consumption | from 3 to 22 Nm3/h |
| Membrane | PTFE |
| Particles | 3 mm |
Complementary accessories
You may also be interested by:
