INOX1-200-PTFE-EX
Pneumatic membrane pump, Stainless steel body
Applications: Compatible with a vast range of chemicals, inks and varnishes. Recommended for use with halogenated solvents
Pneumatic membrane pump, Stainless steel body
Descriptive
Pump marking: Ex II2 GD IIB/IIC 95°C.
Pumps designed for the transfer of aggressive and/or viscous liquids.
Metal pumps are significantly resistant to solvents, hydrocarbons, etc.
Dry self-priming pumps.
The priming height varies depending on whether the pump is dry or wet.
Adjustable flow rate by adjusting the pressure and flow rate of the air (see the accessories).
In case of dry running, the pump continues to run without overheating or wear.
If the delivery of liquid is stopped, the pump stops automatically without getting damaged.
Characteristics
| Fluid | Ink, Halogenated solvents, Varnish |
|---|---|
| Technology | Membrane |
| ATEX | Yes |
| Pump marking | Ex II2 GD IIB/IIC 95°C |
| Pump | Bare |
| Max flow rate | 200l/min |
| Orifice | 1’’ and PN10DN25 flange |
| Materials | Stainless steel |
| Balls | PTFE |
| Sockets | Stainless steel |
| Max. viscosity | 5000 cPo |
| Pressure | 8 bars |
| Dry membrane | 5 m |
| Wet membrane | 8 m |
| Air consumption | from 6 to 60 Nm3/h |
| Membrane | PTFE |
| Particles | 6 mm |
Complementary accessories
You may also be interested by:
