PP1SAN
Pneumatic membrane pump, PP body
Applications: Water-based liquid, acid or diluted base, AdBlue, etc.
Pneumatic membrane pump, PP body
Descriptive
Matériaux de construction
- Pompe pneumatique à membrane
- Corps : polypropylène
Spécification et avantages
- Orifices 1"
- Débit jusqu’à 100 l/mn
- Pression 7 bars
- Hauteur d’aspiration max. 4,5 m (à sec), 7 m (membranes mouillées)
- Particules : 4 mm
- Consommation d’air : de 3 à 30 Nm3/h
- Viscosité max. : 5000 centipoise
Characteristics
| Fluid | Acid, Adblue, Water |
|---|---|
| Technology | Membrane |
| ATEX | Yes |
| Pump | Bare |
| Max flow rate | 100l/min |
| Orifice | 1’’ |
| Materials | Polypropylene |
| Balls | PTFE |
| Sockets | PP |
| Other contact parts | Stainless steel, EPDM |
| Max. viscosity | 5000 cPo |
| Pressure | 8 bars |
| Dry membrane | 4,5 m |
| Wet membrane | 7 m |
| Air consumption | from 3 to 30 Nm3/h |
| Membrane | Santoprene® |
| Particles | 4 mm |
Complementary accessories
You may also be interested by:
