Back

AL1-200-PTFE-EX

Pneumatic membrane pump, Aluminium body

Applications: Solvents (acetone, acetates, aldehydes), inks, lacquers, paints

Need advice?

Contact us

Pneumatic membrane pump, Aluminium body

Descriptive

Atex Pump marking: II2 GD IIB/IIC 95°C.

Pumps designed for the transfer of aggressive and/or viscous liquids.
Metal pumps are significantly resistant to solvents, hydrocarbons, etc.
Dry self-priming pumps.
The priming height varies depending on whether the pump is dry or wet.
Adjustable flow rate by adjusting the pressure and flow rate of the air (see the accessories).
In case of dry running, the pump continues to run without overheating or wear.
If the delivery of liquid is stopped, the pump stops automatically without getting damaged.

Characteristics

More Information
Fluid Ink, Lacquer, Painting, Solvents
Technology Membrane
ATEX Yes
Pump marking II2 GD IIB/IIC 95°C
Pump Bare
Max flow rate 200l/min
Orifice 1’’ and PN10DN25 flange
Materials Aluminium
Balls PTFE
Sockets Stainless steel
Max. viscosity 5000 cPo
Pressure 8 bars
Dry membrane 5 m
Wet membrane 8 m
Air consumption from 6 to 60 Nm3/h
Membrane PTFE
Particles 6 mm